Pos.
Item
Description
6
Stop
Stop the pump (when under manual control)
7
Start
Start the pump (when under manual control)
8
Power control
Displays the control value input when under manual control. Tap to
change the value. Grayed out when not in use.
9
Minimum power
Minimum power level setting; the user can change the lowest
minimum power value.
10
Open PID display
Tap to open the PID popup, see section
Viewing PID controller
values.
5.12 Controlling actuators
To control a valve manually and change its PID settings (if applicable), tap on the
valve’s icon in the
Process screen.
Actuator popup ver. 2
Pos.
Item
Description
1
Actuator popup window Pop-up window for actuators. Allows the valve actuator to be
controlled manually if required.
2
Close button
Closes the pop-up window.
3
Auto/Manual toggle
button
Toggle between automatic and manual mode.
● Green: automatic
● White: manual
4
Closed button
Close the valve/run the actuator to the closed position (when under
manual control).
5
Open button
Open the valve/run the actuator to the open position (when under
manual control).
6
Control value
Displays the control value input (valve opening) when under manual
control. Tap to change the value. Grayed out when not in use.
7
PID button
Tap on the PID button to view and adjust the device’s PID values, see
section
Viewing PID controller values.
Not available for all actuator
types.
58 (66)
EXES01 2150EN
