S 600 – S 2000 main parts
D080678 ver. 1
The assembly may vary depending on the scope of delivery.
Pos.
Part
Pos.
Part
1
Control panel
7
Double safety relief valve with
changeover valve
2
Control cabin
9
Filter drier
3
Condenser
10
Expansion valve
4
Evaporator
11
Main switch and either variable frequency
drive, star-delta starter or soft starter
5
Subcooler
6
Compressor
3.3 System design and sizing the heat pump
Heat pump or pumps must be selected and configured based on the actual capacity
required and the operating conditions specific to the site. These parameters are
specified by the customer.
If there is a change in operating conditions, the original heat pump settings are no
longer valid and need to be checked.
3.4 Connections and dimensions
For information on connection positions and sizes, refer to the diagrams delivered with
the unit.
18 (66)
EXES01 2150EN
