Trane CCE-Compact Series, Установка, эксплуатация и обслуживание

Страница: 57 / 115

V07-19.0 57/115
Component Action Section month
ly
¼ year ½ year year Reference chapter
Housing Ch / Cl Housing inside and outside X
Fan / motor Ch Corrosion check X 9.2.1 Fan
Ch Flexible connection X
Ch Protection grid X
Ch / Cl / M Motor, general X 9.2.2 Motor
Ch
Check current
consumption
X
Filter Ch / Cl / M Panel filters X 9.3.1 Panel filters
Ch / Cl / M Bag filters X 9.3.2 Bag filters
Heat exchanger Ch / Cl Fins X 9.4 Heat exchangers
Ch Frost protection X
Ch / Cl Drain pan X
Ch / Cl Droplet eliminator X
Electric heater Ch / Cl E-heater X 9.4.2 Electric Heater
Check e-heater section for thermal damages after mains supply failure!
Dampers Ch / Cl Dampers X 9.5 Dampers
Weather louver Ch / Cl Weather louver, grid and hood X
Energy recovery Ch / Cl Plate heat exchanger X 9.7.1 Plate heat exchangers
Ch / Cl Heat wheel X 9.7.2 Heat wheels
Control cabinet M Filter X
9.1 Electrical connection, control
cabinet
Ch Fan X
Ch Heater X
Ch Bolts, electrical connections X
Table 6: Maintenance plan
10 Information on airborne noise emitted by the AHUs - on request
Sound data can be printed on request on the technical data sheet, sample see Figure 78 . The
sound power is specified as A-weighted sound power level:
- Line 1: Sound power over the casing
- Line 2: Sound power inlet
-
Line 3: Sound power outlet
The sound through the openings (sound power level in line 2 and 3) is the basis for the calculation
of the on-site sound emissions from the environment.
Figure 78: Sound data information