Trane CCE-Compact Series, Установка, эксплуатация и обслуживание

Страница: 19 / 115

V07-19.0 19/115
Figure 7: Crane lug dismounted Figure 8: Crane lug mounted
Bolts and nuts are delivered with the lifting lugs and must be tightened with the torque according to
Table 2 . If the lifting lugs are already mounted by TRANE, the bolts must be checked before lifting
of the AHU.
Figure 9 : Base frame height
Base frame height H (mm) Bolt type Nm
80 M8x20 10
Table 2: Tightening torque for bolts
3.3.3 Lifting of CCE Compact AHU by crane lugs
- The load effect has to take place uniformly across all four crane lugs.
- The definition of the load carrying equipment is the responsibility of the executing company.
- The correct guidance of the load carrying equipment according to Figure 10 must be observed.
- After the pre-positioning of the delivery section at the desired position, remove the lifting lugs
and use them for the next delivery section.
Base frame height