background image

2

 

18-GJ11D1-2

LAMPS CONTAIN MERCURY!

 

Follow local and state 

guidelines for disposal of mercury bulbs.

CAUTION

!

SAFETY HAZARD! 

This information is for use by individu-

als having adequate backgrounds of electrical and mechanical 
experience. Any attempt to repair a central air conditioning 
product may result in personal injury and/or property dam-
age. The manufacturer or seller cannot be responsible for the 
interpretation of this information, nor can it assume any liability 
in connection with its use.

WARNING

!

PERSONAL INJURY HAZARD!

 

Disconnect input 

power before beginning installation. Professional installation 
required per NEC standards. The power supply to this ultravio-
let appliance must be disconnected before opening or servicing 
the unit. Any access panels or doors, within sight of the UV 
lamps, must be interlocked so as to disconnect power to the 
UV appliance upon opening or removal.

WARNING

!

IMPORTANT -  Avoid touching the lamp with bare hands as skin oils can ac-
celerate future glass soiling and degrade the lamp performance. Wipe the lamp 
with a clean cloth and rubbing alcohol or glass cleaner after handling. 

WARNING

!

HAZARDOUS VOLTAGE AND ExPOSURE TO 
ULTRAVIOLET RADIATION! 

This product contains 

components that emit high-intensity ultraviolet (UV-C) radiation 
which can be harmful to unprotected eyes and skin. Disconnect 
all electrical power, including remote disconnects, before ser-
vicing. Follow proper lockout/tagout procedures to ensure the 
power can not be inadvertently energized. Failure to disconnect 
power before servicing could result in death or serious injury.

HAZARDOUS VAPORS! 

If UV bulbs are broken, an ap-

propriate respirator should be considered to prevent inhalation 
of mercury vapors. Failure to use a respirator could result in 
death or serious injury.

BROKEN GLASS! 

Bulbs are fragile and can be easily 

broken. Always use gloves and eye protection when handling 
these bulbs. Failure to handle bulbs properly may result in 
minor to moderate injury. 

WARNING

!

CAUTION

!

WARNING

!

HAZARDOUS VOLTAGE! 

Multiple power sources may 

be present. Disconnect all electrical power, including remote 
disconnects, before servicing. Follow proper lockout/tagout 
procedures to ensure the power can not be inadvertently ener-
gized. Failure to disconnect power before servicing could result 
in death or serious injury.

Safety Information

Содержание BAYUVCLK001

















Отзывы: