Floor and Ceiling Type Air Handler
Pipe
Pipe
)ODUH1X
t
6
panner
1XW5HTXLUHG7RUTXH
(1).
$OLJQWKHÀDUHGHQGRIWKHFRSSHUWXEHZLWKWKHWKUHDGHGFRQQHFWRUDQGWKHQKDQGWLJKWHQ
WKHÀDUHGQXW
2
The bending of the pipe shall not be too small, otherwise the pipe may crack. A pipe bender
must be used when bending the pipe.
3
Wrap the thermally untreated pipe and connectors with
foam wrap
and then
secure
the
foam wrap
with plastic tape.
Notes:
ķ
'XULQJWKHSLSLQJGRQRWSXOODQ\FRQQHFWRUIRUFHIXOO\WRSUHYHQWWKHFDSLOODU\DQGRWKHU
pipes from cracking, which then would result in leakage.
ĸ
The pipe should be properly supported in the way that its weight will not be
placed on
the
unit.
,IWKHVSHFL¿FDWLRQRIWKHRXWGRRUXQLWSLSHMRLQWGRHVQRWFRQIRUPWRWKDWRIWKHLQGRRUXQLWWKHQ
WKHMRLQWVSHFL¿FDWLRQRIWKHRXWOHWSLSHRIWKHLQGRRUXQLWWDNHVSUHFHGHQFH$UHGXFLQJQLSSOHVKDOO
be installed at the joint of the outdoor unit so as to make the joint of the outdoor unit compatible
with that of the indoor unit.
3LSH'LDPHWHU
5HTXLUHG7RUTXH
˳PP˳LQFK
1PIWOEI
˳PP˳LQFK
1PIWOEI
˳PP˳LQFK
1PIWOEI
˳PP˳LQFK
1PIWOEI
,QVWDOOWKH&RQQHFWLRQ3LSHV