manualshive.com logo in svg

Traktor KONTROL D2, Руководство пользователя

Поделиться
Скачать
Traktor KONTROL D2 Скачать руководство пользователя страница 143

For detailed information on the Touch Strip's preferences, refer to section 

↑

5.3, Touchstrip

.

Direction of Tempo Bending

In TRAKTOR's default setting, swiping your finger on the Touch Strip has a similar effect to

speeding up or slowing down an LP with your hand:

• Move to the left to speed up the LP.
• Move to the right to slow down the LP.

If you didn't learn aligning Decks on turntables, this behavior may not make sense to you. In-
stead, looking at the waveform, you think in terms of moving the playhead position within the
track. Also, you want Tempo Bending to be consistent with Seeking:

• Swipe to the right to move the playhead ahead
• Swipe to the left to move the playhead back.

To  achieve  this,  uncheck  the 

Invert

  option  in: 

Preferences>Traktor  Kontrol  D2>Touch-

strip>Bend Sensitivity

.

Sensitivity

D2 comes with a 

Sensitivity

 setting which should accommodate most users in most situations.

You might, however, find that the touch strip doesn't react immediate enough to your input or
just the opposite, it may recognize input where there was none intended.
You can adjust the Touchstrip's Bend Sensitivity and Scratch Sensitivity separately in: 

Prefer-

ences>Traktor Kontrol D2>Touchstrip

.

4.2.12 Transport Controls

 

The Transport buttons control playback of D2's Deck.

PLAY Button

The 

PLAY

 button starts/stops the playback of a Deck.

Hardware Reference

The Deck

 

TRAKTOR KONTROL D2 - Manual - 143

Содержание KONTROL D2






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды