TRAK Airwolf 3D EVO-T Скачать руководство пользователя страница 1

Страница: 1 / 4

Airwolf 3D EVO-T

Additive Manufacturing Center

Site Preparation Guide

F-16467-57

Rev 10/12/2021

Installation and Service Manual Link:

Floor Plan, Layout & Space Requirements

Machine Specifications

Printer Dimensions (with Door Closed)

28" x 24.5” x 24”

Printer Dimensions (with Door Opened)

28" x 49.5” x 24”

Printer Weight

60 lbs.

Shipping Dimensions

48" x 42" x 35"

Shipping Weight

175 lbs.

Airwolf 3D EVO-T Additive Manufacturing Center

Содержание Airwolf 3D EVO-T

Страница 1: ...southwesternindustries com media manuals 32502_manual pdf Floor Plan Layout Space Requirements Machine Specifications Printer Dimensions with Door Closed 28 x 24 5 x 24 Printer Dimensions with Door Op...

Страница 2: ...r newer Mac Version 2013 or later Mac OS X Yosemite or later Sierra preferred Display Resolution 1024 x 768 or higher 1024 x 768 or higher RAM 2 GB or higher 8 GB onboard memory Hard Disk Space 500 MB...

Страница 3: ...by using a box cutter Be careful not to cut too deeply as you might risk damaging content inside the main box In addition preserve the main box in the case that it might be needed for returns and or a...

Страница 4: ...te clips that are attached to the left and right belts which are located on the upper interior surface of the 3D Printer see image below NOTE When removing the zip ties be careful not to cut the left...