www.TrailFX.com
Page
1
of
3
Rev 040416
Cutting Not
Required
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
1 866 638 4870
30 min
TFX Winch Wireless Remote
Receiver & Battery changing instructions
Part No. WA020
STEP 3:
Remove the White Connector.
STEP 1
: Unscrew six screws beneath the Housing.
STEP 2:
Open the Housing.
STEP 4:
Remove the Receiver by pulling it upwards.
STEP 5:
Connect the New Receiver with the white connector
shown in the picture above.
ADHESIVE TAPE
STEP 6:
Stick the New Receiver using the Adhesive Tape
provided in the bottom side of the Receiver, And fix the
housing.
PULL IT TOWARDS
Drilling Not
Required
FITS FOR TRAIL FX SYNTHETIC ROPE WINCH WS10B.
