www.TrailFX.com
Page
4
of
5
Rev 012219
4.
Attach the Bumper to the frame. Fasten the Bumper with the hardware
(Fig 6A & 6B)
.
5.
Reinstall the factory wiring harness to the fog light.
6.
Level and adjust the bumper, make sure that all hardware is secure and tight.
7.
Installation is finished, pick up all tools.
Fig
5B
Fig
5C
Fig 6
A
(1)12×40mm Hex Bolt
(2)12×37×3mm Flat Washers
(1)12mm Lock Washer
(1)12mm Hex Nut
(1)12×130mm Hex Bolt
(2)12×37×3mm Flat Washers
(1)12mm Lock Washer
(1)12mm Hex Nut
Fig
6B
