www.TrailFX.com
Page
4
of
5
Rev 031518
4.
Attach the Bumper to the frame. Fasten the Bumper with the hardware
(Fig 6)
.
5.
Reinstall the factory wiring harness to the fog light.
6.
Level and adjust the bumper, make sure that all hardware is secure and tight.
7.
Installation is finished, pick up all tools.
Fig
6
(2)12×40mm Hex Bolts
(4)12×37×3mm Flat Washers
(2)12mm Lock Washers
(2)12mm Hex Nuts
