www.TrailFX.com
Page
8
of
8
Rev 062816
PRODUCT CARE
Sweep any dirt and debris out of the bed of the truck. Pick up any items that may scratch the liner, such as rocks or large sticks.
Inspect Bed liner on frequent basic to identify any damages.
Clean the product with mild soap / cleaner to remove stairs.
While washing Rinse bed and tailgate thoroughly until no soap runs off the truck.
Check out these other TrailFX Products!!
www.TrailFX.com
Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time
of purchase by the original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of
fitness for a particular purpose or an intended use. If the product is found to be defective, KAO may replace or repair the product
at our option, when the product is returned prepaid, with proof of purchase. Alteration to, improper installation, or misuse of this
product voids the warranty. KA
O’s liability is limited to repair or replacement of products found to be defective, and specifically
excludes liability for any incidental or consequential loss or damage.
FAQ’s
1.
Will the bed feel hotter than the rest of the truck?
No, protective coating shall help to keep it cooler than truck.
2.
Protective coating is used as an undercoating?
Yes, it can be used.
3.
Is protective coating environmentally friendly?
Yes, there is no possible health hazard and it is environment friendly
4.
Can I take it out Protective Coating?
No, Protective coating is
a permanent coating and can’t be removed.
5.
Does the lining require special maintenance?
No, it can be cleaned up with mild soap.
6.
Missing / Excess Hardware.
Recheck hardware count as per the part list.
7.
Product not installing properly.
Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly.
