Positioning your SafePace Guardian Standalone Camera System
Positioning your SafePace Guardian Standalone Camera System
SafePace Guardian Standalone needs to be located at the side of the road being monitored. Depending on
the option you purchased, the camera, radar head and illuminator(optional) should be one of the following:
»
Front facing
- facing oncoming traffic to capture front license plates
»
Rear facing
- pointed towards receding traffic to capture rear license plates
In addition the camera should be mounted at a height approximately 2 to 4 meters above the roadbed.
Figure 1: Example of a front facing installation
Figure 2: Example of a rear facing installation
Though you can position SafePace Guardian Standalone on either side of the street, it's best if located on
the side nearest the traffic lanes that will be monitored.
N
OTE
:
Be aware that depending on the direction in which the camera is pointed there may be a period
of time (most likely early morning or late afternoon) where the camera may be blinded by sunlight or
the license plate images may tend to be overexposed..
SafePace® Guardian Standalone Camera Installation
Guide
p. 10
