Mounting the Sign
Mounting the Sign
The SafePace 550 sign and optional solar panel should optimally be mounted on a 12-foot to 14-foot pole.
You can install the sign using either of the following methods and hardware options:
»
Standard Pole Banding Mounting
»
Universal Mounting Bracket System
Using the Standard Pole Banding Mounting
The SafePace 550 sign comes with a Standard Pole Banding Mounting system. As this is a standard type of
mounting it requires no special knowledge to easily install the sign.
N
OTE
:
The banding straps included are long enough for use with a 5-inch pole. If you want to use a
larger pole, you will need to obtain longer banding straps.
To install the sign using the standard pole banding mounting system:
1.
Attach the supplied banding brackets to the top and bottom of the rear of the sign with the supplied
tamper-proof, M6 security screws as shown below.
Figure 3: Attaching the banding bracket to the sign
Figure 4: Standard banding brackets mounted directly to a sign with M6 tamper-proof screws
2.
Insert the stainless steel banding strap into the bracket and fasten the sign to the pole.
SafePace® 550 Installation Manual
p. 11
