This floor dimmer is suitable for incandescent lamps and high
voltage halogen lighting 230V (40-500W) without transformer and
for controlling dimmable electronic transformers for low voltage
halogen fixtures. For indoor use only. This floor dimmer is equipped
with a fuse.
Installation
:
•
Always turn off the power before installing!
•
Unscrew the housing and take off the top
•
Strip the power wires sufficiently and screw them
tightly at place 1 & 3 (see drawing)
•
Install
wiring from the lamp at
screw 8 & 10
•
Place the top back and tighten the screws. Make
sure that the wires are securely clamped under the
strain reliefs
1
2
3
4
5
6
7
8
9
10
Power source
:
230V, 50 Hz
Phase (Brown)
Null (Blue)
Ground (Yellow/Green)
O
n/off
Switch
12
Lamp
40-500W
The manufacturer is not liable for damage caused by incorrect use or improper installation of the dimmer.
The warranty period is 2 years from the date of purchase, to be proven by your dealer through your purchase receipt.
Version EN 3.0 (24-08-2021) Keep this manual for possible (re)installation!
TRADIM Aalsbergen 9, 6942 SE Didam, The Netherlands www.tradim.nl
User Manual Tradim 31030-1 series