03/20
Product Code: 2101T
Made in China to TQB Brands Pty Ltd specifications
Page 4
Visit us at www.tqbbrands.com.au
About the TradeQuip brand
The 'TradeQuip' brand of workshop equipment, is designed for use in a demanding workshop
environment
by
professional
users.
With
proven
and
trusted “Made for the
Trade” reliability, 'TradeQuip' branded products offer the very best in performance for an
affordable price. All backed by a 1year trade guarantee across 1,000+ distributors Australia wide.
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1.
FEATURES & MODELS
This TradeQuip Hydraulic Motorcycle Lifter has a safe working capacity of up to 450 kg. The hydraulic foot pump raises and
lowers ATV/Bike while the automatic safety lock makes sure you are safe and secure the entire time. The built-in swivel castors
provide convenient mobility and stability. The TradeQuip Hydraulic Motorcycle Lifter is complete with an extra-large
removable loading ramp which is also suitable for motorcycles with kickstands. The lifters robust and versatile construction,
includes in a front wheel vice and 2 hook mounts for securing the load.
2.
ASSEMBLY
Unpacking: after removing the packing material, make sure the product is in perfect condition and that there are no visible
damaged parts.
Contents:
Main Assembly Sliding Plate
Leading Plate
Vice
Lift Foot Pedal
Release Foot Pedal
Locking Bar
Bolts, Washers, Nuts, Cotter Pins
1.
Fit the sliding plate (36) to the platform (35) to cover the rear wheel removal aperture.
2.
Attach leading plate (37) to end of platform using washers (23) and R-pins (04).
3.
Fit the front wheel vice assembly (34) to the front of the platform using bolts (24), washers (23) and nuts (30).
4.
Fit the baffle plate (32) using bolts (24), washers (23) and nuts (30).
5.
Fit the lift foot pedal (11) to the pump piston spindle (9) and fit the release foot pedal (10) to the release valve spindle
(5)
3.
BEFORE USE
Prior to each use conduct a visual inspection checking for abnormal conditions, such as cracked welds, leaks, and damaged,
loose, or missing parts.
Bleeding System
1.
Leave the pump for 1 hour to allow the oil to settle before bleeding the system. Note: Failure to allow sufficient time
for oil to settle could result in air remaining in the oil. In this event, the pump will not bleed completely requiring a
second bleed of the system.
2.
Bleed the hydraulic circuit to eliminate any in in the system by fully pressing the release food pedal (10) and pumping
the lift foot pedal (11) 15 to 20 times.
3.
Test the lift, unladen, by raising the lift to full height and then lowering. Depress the release foot pedal (10) slowly
to control the rate of descent.
4.
OPERATION
1.
Position the lift in a suitable area on a surface that is solid and level, preferably concrete.
2.
Turn the adjusting screw (18) down to raise the castors (14) off the ground to prevent the lift form moving.
3.
Wheel the motorcycle up the leading plate and onto the platform.
4.
The Vice has a choice of mounting holes to cater for various size motorcycles.
5.
Clamp front wheel in vice to prevent any movement of the motorcycle.
6.
Strap the motorcycle securely to the platform.
7.
Pump the lift foot pedal (11) to raise the lift.
8.
When the platform has been raised to the working height, pass the locking bar (22) through the holes in the front
lifting arm (38) so that the lift cannot be inadvertently lowered.
9.
When work is done, check under the lift to ensure that there are no obstructions and that it is safe to lower the unit.
Remove the locking bar and then SLOWLY press the release foot pedal to GENTLY lower the lift.
10.
The speed of lowering is controlled by the release valve. The more the valve is opened the more rapidly the lift
descends. Ensure the decent is slow and controlled.
11.
When the lift is fully lowered, unstrap the motorcycle, open the vice jaws and remove the cycle from the lift.
