Product Code: 2037T
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
WARNING
FAILURE TO READ THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE & PERSONAL INJURY
PRE-OPERATIONAL SAFETY CHECKS
Inspect the Hydraulic Workshop Press before each use. Do not use if bent, broken, cracked, leaking or otherwise damaged.
Ensure all bolts and nuts are firmly tightened.
Do not exceed the products rated maximum load capacity. Never apply excessive force to a work piece.
Steel and other materials can shatter, always wear approved impact goggles, heavy duty work gloves and appropriate clothing.
If you detect anything that may indicate imminent structural failure, stop using the hydraulic workshop press immediately
and inspect thoroughly.
Only use this hydraulic workshop press on a surface that is stable, level, dry and non-slippery, and capable of sustaining the
load. Keep the surface clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
Do not use this hydraulic workshop press to compress springs or any other item that could disengage and cause a potential
hazard.
Keep hands and feet away from bed area at all times.
Do not modify any component of this equipment.
Only use this device for the purpose for which it has been designed.
When servicing, use only TradeQuip identical replacement parts. Use of any other parts will void the warranty.
Use the right product for the job. There are certain applications for which the Hydraulic workshop press was designed. Do not
modify the Hydraulic workshop press and do not use the Hydraulic workshop press for a purpose for which it was not
intended.
INTENDED USE
For regular professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
STANDARD OPERATING PROCEDURE
DO NOT use this machine unless you have been trained and assessed to a competent level in its sate use and operation, and
have been given permission to use this
Safety glasses must be worn when operating this
equipment
Long loose hair must be contained when operating
this equipment
Safety footwear must be worn when operating
this equipment
Close fitting/protective clothing must be worn
when operating this equipment
Rings and jewellery must not be worn when
operating this equipment
