Installation
49
Riser boards
Removing a riser board
To remove a riser board:
1.
Power down the server, and then detach all of the power cords from the power supplies.
2.
Remove the access panel (on page 29).
3.
Remove the PCIe card (on page 47).
4.
Remove the screws securing the riser board to the riser bracket.
5.
Remove the riser board from the bracket.
Installing a riser board
To install a riser board:
1.
Remove a screw securing the dummy bracket to the riser bracket.
2.
Remove the dummy bracket from the riser bracket if necessary.
