Installation
38
M.2 cards
Installing an M.2 card
To install an M.2 card:
1.
Power off the server and detach all of the power cords from the power supplies.
2.
Remove the access panel (on page29).
3.
Remove the M.2 adapter (on page 36).
4.
Align the slit on the M.2 card connector pins with the protrusion on the connector.
5.
Slide the M.2 card into the connector until it is fully inserted.
6.
Push the M.2 card towards the adapter and hold it in place.
7.
Secure the M2 card to M.2 adapter with a screw.
8.
Install the M.2 adapter (on page 37).
9.
Install the access panel (on page29).
Removing an M.2 card
To remove an M.2 card:
1.
Power off the server and detach all of the power cords from the power supplies.
2.
Remove the access panel (on page29).
3.
Remove the M.2 adapter (on page 36).
4.
Remove the screw securing the M.2 card.
5.
The M.2 card pops out. Grasp it by the edges and slide it out.
