12
Follow these steps and refer to the flowchart in
Figure 17 to set up the system for DISH Network.
a.
Press any button on the interface box front
panel.
b.
At “Service= DIRECTV?,” press CHANGE
until the display shows “Service= DISH.”
Then press ACCEPT.
c.
At “Mode= DISH 1000/129,” press CHANGE
until the display shows the desired mode.
Then press ACCEPT.
You may select any one of the following DISH
Network modes:
DISH 1000/129 or DISH 1000/61
Select one of these modes for DISH Network’s
three-satellite service (DISH 1000). Use the map
in Figure 18 to help determine the appropriate
DISH 1000 mode for your geographic area. Check
with DISH Network for local channels
availability.
DISH 500
Select this mode if you wish to receive
programming from the 119 and 110 satellites for
DISH 500 service.
d.
Be sure to follow the instructions in Step 11
(page 14) to enter your position and Step 12
(page 15) to set up your receiver(s).
Mode
Satellites Tracked
DISH 1000/129
119, 110, and 129
DISH 1000/61
119, 110, and 61
DISH 500
119 and 110
MODE= DISH 1000/129?
CHANGE ACCEPT
Press any
bu
tton
to
b
egin.
TRACKING DTV 101
SYSTEM NEEDS SETUP
SERVICE= DIRECTV?
CHANGE ACCEPT
RESTARTING ANTENNA
Press CHANGE
u
ntil
desired mode displays;
then press ACCEPT.
MODE= DISH 1000/61?
CHANGE ACCEPT
MODE= DISH 500?
CHANGE ACCEPT
INSTALLING DISH SATS
Displays satellites
installed for the
selected mode.
SERVICE= DISH?
CHANGE ACCEPT
Figure 17: DISH Network Setup
= DI
S
H 61
S
atellite Recommended
= DI
S
H 129
S
atellite Recommended
Figure 18: Recommended Areas for DISH 1000 Satellites
Set Up the System
10
Option 1 - DISH Network
