TracPhone FleetBroadband, Руководство пользователя, Страница: 31 / 146

Chapter 2: Getting started
20 Getting started with the wireless IP Handset
Connecting the IP Handset to your wireless access point
To connect the IP Handset to your wireless access point, do as follows:
1. Start up the wireless access point.
2. Switch on your wireless IP Handset by pressing and holding the on hook
key until the display lights up.
3. Press the center select key to enter the menu system.
4. Select Network > Wireless network .
5. When the list of available access points appears in the display, select the
access point you want to connect to.
6. If you are prompted for security settings, select OK to enter the Profiles
menu. Set the security settings as described in To connect the IP Handset to
the wireless network on page 62.
7. Select Connect .
Note
If the IP Handset is out of use for a longer period of time, recharge
the battery every two years to avoid deterioration of the battery.
Note
This procedure is only needed at the first connection. Once
connected, the IP Handset automatically attempts to connect to this
access point, whether it is integrated in the BGAN terminal or not,
whenever it is switched on.
Note
Access points with a profile matching your IP Handset are
marked with
. If this symbol is not present, you cannot
connect to an encrypted network until you have set up your
wireless profile to match the access point.
If you select an
encrypted network without a defined profile you are prompted
for security settings.