CAMON LS14 Lawn Scarifier
LS14 Lawn Scarifier
Page 7
5.5 Height Adjustment
The height of the blades of LS14 Scarifier is altered using the two large knobs at the
front of the machine.
The top knob is connected to the centre of the front axle
via a threaded rod. Rotating the knob in each direction
will raise or lower the front axle in relation to the main
chassis of the machine and in turn alter the height of the
blades with the chassis.
The second knob located below the top knob on the
threaded rod is used to fix the position of the threaded
rod and consequently the height of the blades relative to
the front axle.
5.6
Collection Bag
If fitted, the collection bag will collect the thatch and moss that is removed.
Use the central lifting handle when connecting or
disconnecting the bag from the machine.
Always stop the engine and wait for the blades
to stop rotating by removing or replacing the
collection bag.
To attach the collection bag onto the machine,
first lift the safety back flap on the rear of the
machine chassis with one hand. Then whilst
holding the bag with your other hand guide the two small metal rods protruding
from either side of the collection bag frame into the two channels that have been
formed to hold the bag.
5.7
Rotor Shaft
The LS14 can be fitted with a choice of cartridges.
Free Swinging Blades
Three rods with each rod holding 10
hardened steel blades (30 in total).
The blades are separated using
spacers and springs. Each set of 10
blades on a rod is offset from the
other two rods.
