Mobile number and unit
serial number are located on
the box. The label can be
peeled off and saved for
later use.
+xx xx xx xx xx
S/N xxxxxx
Mount Raw with the serial
number facing outwards in
order to see the LED.
Status
LED mode
LED color
Status indication
Red flashing light and constant
green light in LED
- Mobile network is OK
- GPS has valid satellite
position
No light in LED
- No power supply
Constant red light and no green
light in LED
- NO mobile network
- GPS has NO satellite position
Red flashing light and no green
light in LED
- Mobile network is OK
- GPS has NO satellite position
Constant red light and green light
in LED
- NO mobile network
- GPS has satellite position
Practical advice
Functionality Check
LED status indication
M8 connector for access control and temperature sensor
M8 connector for access control and temperature sensor
Connection Guide Raw TU501
Can be connected to hour counter. Optional input
2
Connect to the ignition signal (mandatory for vehicles and machines)
1
Can be used to control a relay
3/ 4
Connect to machine battery through a fuse (mandatory)
1
Connect to ground (mandatory)
Description
Can be used for INFILT function. Optional input
2
Optional input
1
Machine and vehicle guidelines for correct wiring
Connect to CAN High
Connect to CAN Low
1 - Wire input
CAN High
CAN Low
Additional input for TU501-2
1 - Wire input
Additional input for TU501-4
Digital output 1
Digital input 3
Ground
Power
Digital input 2
Digital input 1
Digital input 4
7005
.2104 V4
Wire color
2
Active/high when min. 9,5V DC
at input
3
Max. load 200 mA
4
Do NOT use this output to switch off
vehicles and machines during operation
or driving
1
Supply voltage range
12 - 48 V
TU501 devices have to be installed in a minimum distance of 5 cm from the
user of the machine or vehicle.
Installation Example With Access Control
Machine
battery
Ignition
white
87a
87
86
85
30
yellow
blue
brown
red
Starter
Machine
Fuse
HOURS
0 0 0 0 0
Hour counter
Alternator
Main
switch
pink
