TR-Electronic LE-25, Руководство пользователя, Страница: 66 / 88

Parameterization

TR-Electronic GmbH 2020, All Rights Reserved Printed in the Federal Republic of Germany
Page 66 of 88 TR - ELE - BA - DGB - 0030 - 01 06/15/2020
Index 0x004D: Error Output Value 7.2.6
The parameter
Error Output Value
determines which position value should be transmitted in
case of an error. The data value is output, if the measuring system can output no more measurement.
This is given e.g., if a beam interruption is present.
Index Subindex Name Length Type Access
0x004D 0 Error Output Value 8 Bit UIntegerT rw
Value Assignment Description Default
0x00 Position = 0 The position is set to '0' X
0x01 Position = -1
All 32 bits are set to '1' (0xFFFFFFFF or -1)
0x02 Last valid value Output of the last valid position
7.3 Position - Parameter
Index 0x0046: Count Direction 7.3.1
The parameter
Count Direction
defines the counting direction for the position value.
Index Subindex Name Length Type Access
0x0046 0 Count Direction 8 Bit UIntegerT rw
Value Assignment Description Default
0x00 Positive
With increasing distance to the measuring system:
values increasing
X
0x01 Negative
With increasing distance to the measuring system:
values decreasing