![TR-Electronic CEK-58 Скачать руководство пользователя страница 105](http://html1.mh-extra.com/html/tr-electronic/cek-58/cek-58_user-manual_1146698105.webp)
Printed in the Federal Republic of Germany
TR-Electronic GmbH 2013, All Rights Reserved
09/23/2014
TR - ECE - BA - DGB - 0102 - 03
Page 105 of 171
6 Commissioning
6.1 EDS file
The EDS (electronic datasheet) contains all information on the measuring system-
specific parameters and the measuring system’s operating modes. The EDS file is
integrated using the EtherNet/IP network configuration tool to correctly configure or
operate the measuring system.
The EDS file has the file name "
04710022_TR_C_SERIES_X_X.eds
". The file is on
the Software/Support DVD: Order number: 490-01001, Soft-No.: 490-00423.
6.2 Bus status display
The EtherNet/IP measuring system is equipped with three diagnostic LEDs. At start-up
a self-test of the LEDs is executed by means of the successively flashing of all LEDs.
Figure 4: EtherNet/IP diagnostic LEDs
LED1: Port 1 - Link / Data Activity
LED2: Port 2 - Link / Data Activity
LED Status
Description
OFF
- Voltage supply absent or too low
- No Ethernet connection
- Hardware error, measuring system defective
ON = Link
Ethernet connection established
FLASHING =
Data Activity
Data transfer TxD/RxD
LED colour
Description
green
Normal operation
yellow
Transmission error detected on port. The data transmission remain
unchanged. After 60 sec. the status changes to "green" again.