Safety Program Creation - Configuration Example
TR-Electronic GmbH 2016, All Rights Reserved
Printed in the Federal Republic of Germany
Page 114 of 159
TR - ECE - TI - DGB - 0292 - 01
09/20/2016
To define the access protection for the safety program, select the
protection
directory in the directory tree of the
Safety Administration Editor
with
the left mouse button.
In the mask, under
Offline safety program protection
, select the
Setup
button with the left mouse button. This opens the
Define password
window, where the password is defined. The password "pw_fprog" is used in the
example project.
