TQ TQMx50UC, Руководство пользователя

Страница: 19 / 36

User's Manual l TQMx50UC UM 0101 l © 2018 TQ-Group Page 15
3.7.2 COM Express™ Connector Pin Assignment
Table 10: COM Express™ Connector Pin Assignment
Pin Pin-Signal Description Type Remark
A1 GND(FIXED) Ground GND
A2 GBE0_MDI3– Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A3 GB Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A4 GBE0_LINK100# Gigabit Ethernet Controller 0 100 Mbit / sec link indicator OD
A5 GBE0_LINK1000# Gigabit Ethernet Controller 0 1000 Mbit / sec link indicator OD
A6 GBE0_MDI2– Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A7 GB Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A8 GBE0_LINK# Gigabit Ethernet Controller 0 link indicator OD
A9 GBE0_MDI1– Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A10 GB Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A11 GND(FIXED) Ground GND
A12 GBE0_MDI0– Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A13 GB Gigabit Ethernet Controller 0: Media Dependent Interface I/O
A14 GBE0_CTREF Reference voltage for Carrier Board Ethernet channel 0 Power
A15 SUS_S3# Indicates system is in Suspend to RAM state. Active low output. O PD TQ-flexiCFG
A16 S SATA differential transmit pairs O
A17 SATA0_TX– SATA differential transmit pairs O
A18 SUS_S4# Indicates system is in Suspend to Disk state. Active low output. O PD TQ-flexiCFG
A19 S SATA differential receive pairs I
A20 SATA0_RX– SATA differential receive pairs I
A21 GND(FIXED) Ground GND
A22 S SATA differential transmit pairs O
A23 SATA2_TX– SATA differential transmit pairs O
A24 SUS_S5# Indicates system is in Soft Off state. Active low output. O PD TQ-flexiCFG
A25 S SATA differential receive pairs I
A26 SATA2_RX– SATA differential receive pairs I
A27 BATLOW# Indicates that external battery is low I PU
A28 (S)ATA_ACT# SATA activity indicator O
A29 AC/HDA_SYNC Sample-synchronization signal to the CODEC(s) O
A30 AC/HDA_RST# Reset output to CODEC, active low. O
A31 GND(FIXED) Ground GND
A32 AC/HDA_BITCLK Serial data clock generated by the external CODEC(s) I/O
A33 AC/HDA_SDOUT Serial TDM data output to the CODEC O
A34 BIOS_DIS0# Selection straps to determine the BIOS boot device I PU
A35 THRMTRIP# indicating that the CPU has entered thermal shutdown O
A36 USB6– USB differential pairs I/O
A37 USB6+ USB differential pairs I/O
A38 USB_6_7_OC# USB over-current sense, USB channels 6 and 7 I PU
A39 USB4– USB differential pairs I/O
A40 USB4+ USB differential pairs I/O
A41 GND(FIXED) Ground GND
A42 USB2– USB differential pairs I/O
A43 USB2+ USB differential pairs I/O
A44 USB_2_3_OC# USB over-current sense, USB channels 2 and 3 I PU
A45 USB0– USB differential pairs I/O
A46 USB0+ USB differential pairs I/O
A47 VCC_RTC Real-time clock circuit-power input. N3.0 V Power
A48 EXCD0_PERST# PCI ExpressCard: reset, active low, one per card O TQ-flexiCFG
A49 EXCD0_CPPE# PCI ExpressCard: PCI Express capable card request, active low I PU TQ-flexiCFG
A50 LPC_SERIRQ LPC serial interrupt I/O TQ-flexiCFG
A51 GND(FIXED) Ground GND
A52 P PCI Express differential transmit pairs O N/A
A53 PCIE_TX5– PCI Express differential transmit pairs O N/A
A54 GPI0/SD_DATA0 GPI0 / SDIO Data lines I PU TQ-flexiCFG
A55 P PCI Express differential transmit pairs O N/A