TQ MB-SMARC-3, Руководство пользователя

Страница: 21 / 34

User's Manual l MB-SMARC-3 UM 0100 l © 2022, TQ-Systems GmbH Page 16
3.6.9 MIPI CSI (Camera serial interface)
The MB-SMARC-3 is equipped with two MIPI camera interfaces. It can be connected via a Board-to-Board connector.
MIPI CSI connectors
•
Connector type: Tyco 5177986-2
•
Mating connector: Tyco 5177985-2
Table 11: MIPI CSI Connectors, X50
Illustration 15: MIPI CSI Connector, X50
The MIPI CSI connector is not placed on current MB-SMARC-3 variants. Please contact TQ-Support to request MIPI CSI support on
the MB-SMARC-3.
Remark Signal Pin Signal Remark
– GND 1 2 GND –
1.8 V GPIO CAM0_PWR# 3 4 CAM1_PWR# 1.8 V GPIO
1.8 V GPIO CAM0_RST# 5 6 CAM1_RST# 1.8 V GPIO
– NC 7 8 NC –
– NC 9 10 NC –
– NC 11 12 NC –
– GND 13 14 GND –
– NC 15 16 CSI1_RX3–
CSI 1 Lane 3
differential pair
– NC 17 18 C
– GND 19 20 GND –
– NC 21 22 CSI1_RX2–
CSI 1 Lane 2
differential pair
– NC 23 24 C
– GND 25 26 GND –
CSI 0 Lane 1
differential pair
CSI0_RX1– 27 28 CSI1_RX1–
CSI 1 Lane 1
differential pair
C 29 30 C
– GND 31 32 GND –
CSI 0 Lane 0
differential pair
CSI0_RX0– 33 34 CSI1_RX0–
CSI 1 Lane 0
differential pair
C 35 36 C
– GND 37 38 GND –
CSI 0 clock
differential pair
CSI0_CLK– 39 40 CSI1_CLK–
CSI 1 clock
differential pair
C 41 42 C
– GND 43 44 GND –
CAM0
I2C Bus
I2C_CAM0_DAT_1V8 45 46 I2C_CAM1_DAT_1V8
CAM1
I2C Bus
I2C_CAM0_CLK_1V8 47 48 I2C_CAM1_CLK_1V8
– GND 49 50 GND –
– CLK_CAM_MCLK_1V8 51 52 NC –
– GND 53 54 GND –
– NC 55 56 V_5V_STBY
5 V supply
voltage
– NC 57 58 V_5V_STBY
– NC 59 60 V_5V_STBY
1
59
2
60