TQ-Systems MBLX2160A Скачать руководство пользователя страница 50

Страница: 50 / 55

Page 44

CLIMATE AND OPERATIONAL CONDITIONS

In general reliable operation is given when the following conditions are met:

Table 29:

Climatic and operational conditions MBLX2160A

Parameter

Range

Remark

Ambient temperature

-10 °C to +60 °C

With Lithium battery

Ambient temperature

-40 °C to +85 °C

Without Lithium battery

Relative humidity (operation / storing)

10 % to 90 %

Not condensing

Attention: Destruction or malfunction, TQMLX2160A heat dissipation

The TQMLX2160A belongs to a performance category in which a cooling system is essential.
It is the user’s sole responsibility to define a suitable heat sink (weight and mounting position)

depending on the specific mode of operation (e.g., dependence on clock frequency, stack height,

airflow, and software).
Particularly the tolerance chain (PCB thickness, board warpage, BGA balls, BGA package, thermal pad,

heatsink) as well as the maximum pressure on the LX2160A must be taken into consideration when

connecting the heat sink.
The LX2160A is the highest component on the TQMLX2160A. Inadequate cooling connections

can lead to overheating of the TQMLX2160A and thus malfunction, deterioration or destruction.

7.1

Protection against external effects

Protection class IP00 was defined for the MBLX2160A. There is no protection against foreign objects, touch or humidity.

7.2

Reliability and service life

No detailed MTBF calculation has been done for the MBLX2160A.

Содержание MBLX2160A
























































Результаты поиска

Содержание MBLX2160A

Отзывы:

Бренды по названию

Популярные бренды

TQ-Systems MBLX2160A, Руководство пользователя

Результаты поиска

Содержание MBLX2160A

Отзывы:

Бренды по названию

Популярные бренды