User's Manual l MBa335x UM 0202 l © 2018, TQ-Systems GmbH
Page 5
3.1.2
Functionality
The system core is the TQMa335x processor module with a Texas Instruments Sitara AM335x CPU.
The TQMa335x connects all peripheral components to each other.
In addition to the standard communication interfaces like USB, Ethernet, RS-232, RS-485, LVDS etc. all other available signals of
the TQMa335x are routed to 2.54 mm standard headers.
The following interfaces / functions and user's interfaces are provided on the MBa335x.
Table 2:
Overview interfaces
Interface
Qty.
Type of connector
Remark
USB 2.0 Hi-Speed host
2
USB receptacle Type-A
Dual port receptacle, right angle
USB 2.0 Hi-Speed host
1
USB receptacle Type-A
Single port receptacle, right angle
USB 2.0 Hi-Speed host
1
Header
–
USB 2.0 Hi-Speed OTG
1
USB receptacle micro-AB
–
Ethernet 1000BASE-T
1
RJ45 receptacle
Receptacle with integrated magnetics
CAN
2
Phoenix basic housing
Straight version, gal. separated
RS-485
1
Phoenix basic housing
Straight version, gal. separated
RS-232
1
D-Sub 9-pin connector
Right angle, Debug-UART
LVDS
1
DF19 receptacle
LVDS data
LVDS-CMD
1
DF19 receptacle
LVDS control lines
Audio Out
3
Jack 3.5 mm
1 × Line-out (stereo)
1 × Line-in (stereo)
1 × Microphone (mono)
SD card
1
Push-Pull type
–
1
Mini PCIe
–
PCIe
1
SIM card holder
–
JTAG
1
20-pin header, 2.54 mm pitch
–
EMU
1
8-pin header, 2.54 mm pitch
–
Headers
3
Header, 2.54 mm pitch
-
USB Host 6, Host 4
-
Test
-
I2C0, I2C1, I2C2
-
MCASP0
-
RES1, RES2
-
UART0, UART3, UART4
-
SPI0, SPI1
-
Timer
-
Touch
-
LCD-CTRL, LCD-DATA
-
CLKOUT
-
ANALOG
1
DC jack (2.5 mm / 5.5 mm)
–
Power In
(V
IN
= 24 V ±5 % DC)
1
DC jack 2-pin (screw terminals)
–
Power Out header
1
Header, 2.54 mm pitch
-
3.3 V @ 2 A
-
5 V @ 2 A
-
12 V @ 3 A
Backup supply
1
8-pin header, 2.54 mm pitch
–
Battery holder
1
CR2032 holder
Backup battery RTC
Table 3:
Overview diagnose and user’s interfaces
Interface
Qty.
Component
Remark
Status-LEDs
18
Chip LEDs
Among others Power-LEDs, LEDs at GPIOs, …
Temperature sensor
1
SE97BTP
–
Power / reset button
3
Push button
–
Navigation buttons
3
Push button
–
Boot-Mode configuration
16
DIP switch
–
CAN and RS-485 termination
4
DIP switch
–
Signal generator
1
Buzzer
–