background image

copyright © 2006, Test Products International, Inc

The Value Leader

TM

www.tpi-thevalueleader.com

Test Products International, Inc.

9615 SW Allen Blvd

Beaverton, OR  97005-4814 USA

Ph: 503-520-9197 Fax: 503-520-1225

Test Product International Ltd.

342 Bronte Street South, Unit 9

Milton, Ontario L9T 5B7

Ph: 905-693-8558 Fax: 905-693-0888

Test Products International UK Ltd.

Longley House, East Park

Crawley, West Sussex  RH10 6AP

Ph: +44 (0) 1293 561212  Fax: +44 (0) 1293 813465

505 Instruction Manual

505

PHOTO / CONTACT
TACHOMETER

Instruction Manual

Содержание The Value Leader 505

Страница 1: ...05 4814 USA Ph 503 520 9197 Fax 503 520 1225 Test Product International Ltd 342 Bronte Street South Unit 9 Milton Ontario L9T 5B7 Ph 905 693 8558 Fax 905 693 0888 Test Products International UK Ltd Longley House East Park Crawley West Sussex RH10 6AP Ph 44 0 1293 561212 Fax 44 0 1293 813465 505 Instruction Manual 505 PHOTO CONTACT TACHOMETER Instruction Manual ...

Страница 2: ...ss the desired function button If a stored value appears release START button until the display goes off Then press the START button immediately and a zero reading will be displayed until the unit is used for mea suring RPM or the START button is released 2 OPERATION SPECIFICATIONS Function Range Accuracy Photo Tach 6 30 000 RPM 0 1 of FS 1 digit Contact Tach 6 20 000 RPM 0 1 of FS 1 digit Surface...

Страница 3: ...ing object to be measured 3 Depress and hold the START button and then press the Photo button lower right on the 505 4 With the start button depressed point the optical end at the rotating surface so the relective tape passes the lens every rotation 5 Read the RPM on the LCD display Memory Recall Note The memory resets itself once the START button is depressed and stable measurements are displayed...

Страница 4: ...ll be displayed 4 Press the MEMORY button three times the MIN reading will be displayed Unit will power off after 5 seconds 4 SURFACE SPEED OPERATION Measurement Procedure 1 Screw the shaft assembly to the optical end of the 505 2 Insert the large wheel to the end of the shaft assembly 3 Press and hold the START button and then press the ft min feet per minute or m min meters per minute on the 505...

Отзывы: