TPI PGM100, Инструкция по эксплуатации

Страница: 12 / 16

OPERATION and USE (Continued)
To view the remaining operational time in continuous mode, press the zero
button for 2-3 seconds and release. It will display the time remaining prior
to performing auto zero.
BAT indicates low battery output and service will be needed soon. Only
factory trained personnel should perform any internal servicing.
BAT + LO indicates instrument should be immediately taken out of service
for battery replacement. Only factory trained personnel should perform any
internal servicing.
MO indicates months/days remaining of operation time before battery and
sensor servicing are required. Only factory trained personnel should per-
form any internal servicing.
I2C indicates a communication error in the EEPROM. Service is required.
Only factory trained personnel should perform any internal servicing.
To turn off, hold the POWER button down for 6 seconds until "OFF" is dis-
played and release the button.
10