1. Precautions
Before use please read this operation manual and observe the procedures
and methods specified to ensure accurate, reliable measurements.
Only the sensor area is waterproof, please be careful to avoid getting water
into the body from above the probe.
Use care when cleaning the instrument by using a wet cloth or tissue. Use
of chemicals such as acetone or benzene may cause deterioration of the
housing material (ABS) or cause the device to not work properly.
Never attempt to disassemble or modify this product.
If the sensor is exposed to temperatures below 0°C (32°F) or above 100°C
(212°F) for an extended period of time damage may occur.
Please wash the sensor using a neutral detergent and soft cloth or sponge
before and after use. After rinsing fully with water, wipe the sensor softly
using dry cloth or tissue and always keep dry while not in use.
While measuring, make sure the sensor does not contact the bottom or
sides of the container or any solid material within the measured sample. If
contact is made with the container or solid material the displayed reading
might be lower than the actual value.
2
www.
.com
1.800.561.8187
