1
Modem Setup Guide
– NBN FTTP
FRITZ! Box 7490
Please follow the steps below to set up your FRITZ! Box 7490.
1.
Ensure your
NBN Connection Box
is turned on.
2.
Plug an Ethernet cable from the
UNI-D1 port
on your NBN Connection Box into the
yellow LAN 1 port
on your FRITZ! Box modem.
If UNI-
D1 doesn’t work, try each UNI-D port.
3.
Using the supplied power cable, connect the FRITZ! Box's
Power port
to an electrical
outlet and turn it on.
4.
You can connect devices such as PC desktops, laptops or gaming consoles by plugging
Ethernet cables from the devices to any of the three remaining
yellow
LAN ports
, or you
can connect devices via WiFi.
5.
6.
On the Welcome screen click
Cancel
, and then click
Exit Wizard
to exit the Setup
Wizard.
7.
Select
Internet
, then click
Account Information
.
