TP-Link TW-MR3220, Руководство пользователя

Страница: 44 / 104

TL-MR3220 3G/4G Wireless N Router User Guide
-33-

Your PC's MAC Address -
This field displays the MAC address of the PC that is
managing the Router. If the MAC address is required, you can click the
Clone MAC
Address
button and this MAC address will fill in the
WAN MAC Address
field.
Click
Restore Factory MAC
to restore the MAC address of WAN port to the factory default
value.
Click the
Save
button to save your settings.

Note:
Only the PCs on your LAN can use the
MAC Address Clone
function.
4.5.5 LAN
Choose menu “
Network → LAN
”, you can configure the IP parameters of the LAN on the screen
as below.

MAC Address -
The physical address of the Router, as seen from the LAN. The value
can't be changed.

IP Address -
Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.0.1).

Subnet Mask -
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.

Note:
1) If you change the IP Address of LAN, you must use the new IP Address to login the Router.
2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the
DHCP server will change accordingly at the same time
，
while the Virtual Server and DMZ
Host will not take effect until they are re-configured.
4.6 Wireless
There are five submenus under the Wireless menu (shown above):
Wireless Settings
,
Wireless Security, Wireless MAC Filtering, Wireless Advanced
and
Wireless Statistics.