95
Chapter 5
Configure the Router in WISP Mode (Hotspot Mode)
•
ICMP-FLOOD Packets Threshold (5~3600)
- The default value is 50. Enter a value
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
•
Enable UDP-FLOOD Filtering
- Tick the checkbox to enable this function.
•
UDP-FLOOD Packets Threshold (5~3600)
- The default value is 500. Enter a value
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
•
Enable TCP-SYN-FLOOD Attack Filtering
-Tick the checkbox to enable or disable this
function.
•
TCP-SYN-FLOOD Packets Threshold (5~3600)
- The default value is 50. Enter a value
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
•
Ignore Ping Packet From WAN Port
- The default setting is disabled. If enabled, the
ping packet from the internet cannot access the router.
•
Forbid Ping Packet From LAN Port
- The default setting is disabled. If enabled, the
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click
Save
.
4. Click
Blocked DoS Host List
to display the DoS host table by blocking.
5. 9. Parental Controls
Parental Controls allows you to block inappropriate and malicious websites, and control
access to specific websites at specific time for your children’s devices.
For example, you want
the children’s PC with the MAC address 00:11:22:33:44:AA can
access www.tp-link.com on Saturday only while the parent PC with the MAC address
00:11:22:33:44:BB is without any restriction.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Parental Controls
.
3. Tick the
Enable Parental Controls
checkbox, enter the MAC address 00:11:22:33:44:BB
in the
MAC Address of Parental PC
field and then click
Save
.
Downloaded from