5
Chapter 2
Connect the Hardware
2. 1. Position Your Router
• The product should not be located in a place where it will be exposed to moisture or
excessive heat.
• Place the router in a location where it can be connected to multiple devices as well as
to a power source.
• Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard.
• The router can be placed on a shelf or desktop.
• Keep the router away from strong devices with strong electromagnetic interference,
such as Bluetooth devices, cordless phones and microwaves.
2. 2. Connect Your Router
There are five operation modes supported by this router: Wireless Router, WISP, Access
Point, Range Extender and Client. Please determine the operation mode you need and
carry out the corresponding steps.
2. 2. 1. Wireless Router Mode
Create an instant private wireless network and share internet to multiple Wi-Fi devices.
This mode is suitable for hotel rooms and home networks.
1. Connect the hardware according to Step A to C.
2. Use the default Wi-Fi Name and Wi-Fi Password printed on the Wi-Fi Info Card or on
the product label at the bottom of your router to connect to the Wi-Fi.
Note
:
• If the hotel’s internet has an authentication process, you will need to authenticate only once and only on one device.
• Check the internet connection on your laptop or smartphone, and please note that:
• If you can access the internet without any restriction, no configuration is required.
• If you’re directed to an authentication page, please complete it to access the internet.
Internet
B
C
A
Downloaded from