manualshive.com logo in svg

TP-Link TL-WR802N, Руководство пользователя, Страница: 48 / 186

Поделиться
Скачать
TP-Link TL-WR802N Скачать руководство пользователя страница 48

44

Chapter 4

 

Configure the Router in Wireless Router Mode

6. 

Select 

Enable Internet Access Control

 to enable Access Control function.

7. 

Select 

Allow the packets specified by any enabled access control policy to pass 

through the Router

 as the default filter policy and click 

Save

.

Done!

Now only the specific host(s) can visit the target(s) within the scheduled time period.

Note:

When 

LAN Host

 and 

Target

 are both set to be the MAC Address mode, you need to set 

Protocol

: ALL, TCP, 

UDP, ICMP. The default setting is 

ALL

 and it is recommended to keep the default setting.

4. 11.  Advanced Routing

Static Routing is a form of routing that is configured manually by a network administrator 
or a user by adding entries into a routing table. The manually-configured routing 
information guides the router in forwarding data packets to the specific destination.

4. 11. 1.  Static Route List

1. Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

Advanced Routing

 > 

Static Route List

.

•  To add static routing entries:

1.  Click 

Add New

.

2. Enter the following information

.

Downloaded from 

ManualsNet.com

 search engine

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов