manualshive.com logo in svg

TP-Link TL-WR802N, Руководство пользователя, Страница: 171 / 186

Поделиться
Скачать
TP-Link TL-WR802N Скачать руководство пользователя страница 171

167

Chapter 8

 

Configure the Router in Client Mode

• 

Client Name

 - The name of the DHCP client.

• 

MAC Address

 - The MAC address of the DHCP client. 

• 

Assigned IP

 - The IP address that the outer has allocated to the DHCP client.

• 

Lease Time

 - The time of the DHCP client leased. After the dynamic IP address has 

expired, a new dynamic IP address will be automatically assigned to the user.  

You cannot change any of the values on this page. To update this page and show the 
current attached devices, click 

Refresh

.

8. 6.  System Tools

8. 6. 1.  Diagnostic

Diagnostic is used to test the connectivity between the router and the host or other 
network devices.
1. Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

System Tools

 > 

Diagnostic

.

• 

Diagnostic Tool

 - Select one diagnostic tool.

• 

Ping

 - This diagnostic tool troubleshoots connectivity, reachability, and name 

resolution to a given host or gateway. 

• 

Tracerouter

 - This diagnostic tool tests the performance of a connection.

Downloaded from 

ManualsNet.com

 search engine

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов