manualshive.com logo in svg

TP-Link TL-WR802N, Руководство пользователя, Страница: 17 / 186

Поделиться
Скачать
TP-Link TL-WR802N Скачать руководство пользователя страница 17

13

Chapter 4

 

Configure the Router in Wireless Router Mode

• 

Operation Mode

 - The current wireless working mode in use.

• 

Wireless Radio

 - Indicates whether the wireless radio feature of the router is 

enabled or disabled.

• 

Name(SSID)

 - The SSID of the router.

• 

Mode

 - The current wireless mode which the router works on.

• 

Channel

 - The current wireless channel in use.

• 

Channel Width

 - The current wireless channel width in use.

• 

MAC Address

 - The physical address of the router.

• 

WAN

 - This field displays the current settings of the WAN, and you can configure them 

on the 

Network

 > 

WAN

 page.

• 

MAC Address

 - The physical address of the WAN port.

• 

IP Address

 - The current WAN (Internet) IP Address. This field will be blank 

or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet 
connection.

• 

Subnet Mask

 - The subnet mask associated with the WAN IP Address.

• 

Default Gateway

 - The Gateway currently used is shown here. When you use 

Dynamic IP as the internet connection type, click 

Renew 

or 

Release

 here to 

obtain new IP parameters dynamically from the ISP or release them.

• 

DNS Server

 - The IP addresses of DNS (Domain Name System) server.

• 

System Up Time

 - The length of the time since the router was last powered on or 

reset.

Click 

Refresh

 to get the latest status and settings of the router.

4. 2.  Operation Mode

1. Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

Operation Mode

. 

3. Select the working mode as needed and click 

Save

.

Downloaded from 

ManualsNet.com

 search engine

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов