8
Chapter 2
Initial Use
Extender
TL-WPA7510
within 2 minutes
Adatper
TL-PA7010
Blinking
Pair
1000Mbps
Blinking
1000Mbps
Pair
LED
Wi-Fi
Reset
On
5.
Relocate the new extender to the Wi-Fi “dead” zone. Use the
SSID (network name) and password on the provided Wi-Fi
Info Card to connect to the internet.
Note: A red Powerline LED indicates poor signal strength. Move the extender to
another location.
Now enjoy the internet with the SSID and password printed on
the Wi-Fi Info Card!
2 2
To Extend the Existing Wireless Network
Extend the existing wireless network by adding a new powerline
extender into the existing powerline network.
For example,
I already set up a wireless network using powerline
devices, but the wireless network is still not big enough to reach
Done!
I want to:
