background image

 

Chapter 1  Product Introduction 

This chapter describes the features of the TL-SG1008/TL-SG1016D/TL-SG1024D 
Switch. 

1.1  Product Overview 

The TL-SG1008/TL-SG1016D/TL-SG1024D Switch provides you with a high- 
performance, low-cost, easy-to-use, seamless and standard upgrade to boost your 
old network to 1000Mbps. Increase the speed of your network server and 
backbone connections make Gigabit a reality. Power users in the home, of

fi

ce, 

workgroup, or creative production environment can now move large, bandwidth- 
intensive 

fi

les faster. Transfer graphics, CGI, CAD, or multimedia 

fi

les and other 

applications that have to move large 

fi

les across the network almost instantly. 

The TL-SG1008/TL-SG1016D/TL-SG1024D Switch features a non-blocking 
switching architecture that forwards and filters packets at full wire-speed for 
maximum throughput, MAC address auto-learning and auto-aging, IEEE802.3x 

fl

ow control for full-duplex mode and backpressure for half-duplex mode. It is 

compatible with all 10,100 and 1000Mbps Ethernet devices because it is 
standard-based. It protects your existing network investments while providing you 
with a straightforward migration path to faster Gigabit speeds. 

The TL-SG1008/TL-SG1016D/TL-SG1024D Switch is plug-and-play and no 
configuration is required. Auto MDI/MDI-X cable detection on all ports eliminate the 
need for crossover cable or Uplink port. Each port can be used as general ports or 
Uplink ports, and any port can be simply plugged into a server, a hub, a router or a 
switch, using the straight cable or crossover cable. Diagnostic LEDs which display 
link status and activity, allowing you to quickly detect and correct problems on the 
network. 

1.2  Features 

¾

  Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standards 

¾

 8/16/24 10/100/1000Mbps 

Auto-Sense RJ45 ports supporting Auto-MDI/MDIX 

¾

  All ports Support Full/Half Duplex transfer mode for 10/100Mbps and Full 

Duplex transfer mode for 1000Mbps 

¾

 Supports IEEE802.3x 

fl

ow control for full-duplex mode and backpressure for 

half-duplex transfer mode 

¾

  Non-blocking switching architecture that forwards and filters packets at full 

wire-speed for maximum throughput 

¾

  Supports MAC address auto-learning and auto-aging 

¾

  LED indicators for monitoring power, link, speed and activity 

¾

  Desktop and rack-mountable steel case 

¾

 Internal power supply 

Содержание TL-SG1008

















Отзывы: