User Guide
38
Wireless MAC Address Filter:
Wireless access can be filtered by using the MAC
addresses of
the wireless devices transmitting within your network’s RADIUS.
Active:
If you wish to filter users by MAC Address, select
Activated
, and
Deactived
for
don’t.
Action:
To filter wireless users by MAC Address, select
Allow
Association
or
Deny
Association
the follow Wireless LAN station(s) association.
MAC Address:
Enter the MAC Address you wish to filter in the field.
Note:
For most users, it is recommended to use the default Wireless LAN Performance settings. Any
changes made to these settings may adversely affect your wireless network. Under certain
circumstances, changes may benefit performance. Carefully consider and evaluate any
changes to these wireless settings.
4.2.4
6RD
IPv6 tunnel is a kind of transition mechanism to enable IPv6-only hosts to reach IPv4 services,
and to allow isolated IPv6 hosts and networks to reach each-other over IPv4-only
infrastructure before IPv6 completely supplants IPv4. It is a temporary solution for networks
that do not support native dual-stack, where both IPv6 and IPv4 run independently.
As a type of IPv6 tunnel, 6RD is used in the situation that your WAN connection is IPv4 while
LAN connection is IPv6. Go to
Interface
Setup
→
6RD
.
6RD Enable:
The default setting is disabled. Select Enable when your WAN connection is
IPv4 while LAN connection is IPv6.
6rd IPv6 Prefix:
Enter the prefix of the IPv6.
Содержание TD-W8961N
