Entry Description:
Max Learned MAC:
Specify the maximum number of MAC addresses that can be
learned on the port. When the learned MAC address number
reaches the limit, the port will stop learning.
Learned Num:
Displays the number of MAC addresses that have been
learned on the port.
Learn Mode:
Select the Learn Mode for the port.
•
Dynamic:
The switch will delete the MAC addresses that
are not used or updated within the aging time. It is the
default setting.
•
Static:
The learned MAC addresses are out of the
influence of the aging time and can only be deleted
manually. The learned entries will be cleared after the
switch is rebooted.
Status:
Enable or disable the port security feature on the port. By
default, it is disabled.
Note:
1.
Port Security cannot be enabled on the member port of a LAG, and the port with Port
Security enabled cannot be added to a LAG.
2.
On one port, Port Security and 802.1X cannot be enabled at the same time.ort Security
function is disabled when the 802.1X function is enabled.
6.1.4
Protected Ports
This feature is used to restrict the communication between the specific ports. A port that is a
member of a protected ports group is a protected port. Protected ports in the same protected
ports group cannot forward traffic to each other, even if they are in the same VLAN. But the
protected ports can forward traffic to the unprotected ports and the ports that are in a different
group.
Choose the menu
Switching
→
Port
→Port Isolation
to load the following page.
Figure 6-5 Port Isolation Config
The above page displays the information of protected ports groups. Click
Edit
to configure the
group on the following page.
58
Содержание T3700G-28TQ
Страница 1: ...User Guide T3700G 28TQ T3700G 52TQ 1910012358 REV3 0 0 November 2018...
Страница 11: ...XI...
