Time:
Displays the time when the log event occurs. The log can get the
correct time after you configure on the System ->System Info->
System Time Web management page.
Module:
Displays the module which the log information belongs to. You can
select a module from the drop-down list to display the
corresponding log information.
Severity:
Displays the severity level of the log information. You can select a
severity level to display the log information whose severity level
value is the same or smaller.
Content:
Displays the content of the log information.
Note:
1.
There are 8 severity levels marked with value 0-7. The smaller value has the higher priority.
2.
This page displays logs in the log buffer, and at most 1024 logs are displayed.
17.2.2
Local Log
Local Log is the log information saved in switch. By default, all system logs are saved in log
buffer and the function of saving logs to the log file in the flash is disabled. On this page, you
can set the output channel for logs.
Choose the menu
Maintenance
→
Log
→
Local Log
to load the following page.
Figure17-4 Local Log
Configuration Procedure:
1)
Select your desired channel and configure the corresponding severity and status.
2)
Click
Apply
to make the settings effective.
405
Содержание T3700G-28TQ
Страница 1: ...User Guide T3700G 28TQ T3700G 52TQ 1910012358 REV3 0 0 November 2018...
Страница 11: ...XI...
