TP-Link T3700G-28TQ, Руководство пользователя

Страница: 249 / 430

10.9.11
Application Example for OSPF

Network Requirements
1. The AS is divided into three areas and all switches in the AS run OSPF.
2. Switch A and Switch B act as ABRs to forward routing information between areas.
3. Each switch can learn routing information to all the network segments in the AS after the
configuration.

Network Diagram

Configuration Procedure

Configure Switch A
Step Operation Description
1 Create routing
interfaces and
their IP
addresses
Required. On page Routing →Interface→ Interface Config , create
routed port 1/0/1 with the IP 1.10.1.1/24 and routed port 1/0/2 with
the IP 1.20.1.1/24.
2 Create OSPF
process
Required. On page Routing →OSPF→ Process , Create OPSF process
1 and configure the Router ID as 1.1.1.1.
3 Create
networks in the
area
Required. On page Routing →OSPF→ Network , configure network
1.10.1.0/24 in area 0 and configure network 1.20.1.0/24 in area 1.
4 Configure area
aggregation
Optional. On page Routing →OSPF→Area Aggragation , configure
the aggregation address as 1.20.0.0/16 in area 1.

Configure Switch B
Step Operation Description
1 Create routing
interfaces and
their IP
addresses
Required. On page Routing →Interface→ Interface Config , create
routed port 1/0/1 with the IP 1.10.1.2/24 and routed port 1/0/2 with
the IP 1.30.1.1/24.
238