manualshive.com logo in svg

TP-Link T2500G-10MPS, Руководство пользователя

Поделиться
Скачать
TP-Link T2500G-10MPS Скачать руководство пользователя страница 599

Configuration Guide     575

Configuring Network Security

IP-MAC Binding Configurations

Collision

Displays the collision status of the entry.

Warning

: The collision entries have the same IP address and MAC address, and all the 

collision entries are valid. This kind of collision may be caused by the MSTP function. 

Critical

: The collision entries have the same IP address but different MAC addresses. 

For the collision entries learned from the same source, only the newly added entry will 

be valid. For the collision entries learned form different sources, only the entry with 

the highest priority will be valid. The priority of different entry types, from high to low, 

is Manually, ARP Scanning and DHCP Snooping.

2.2  Using the CLI

Binding entries via ARP scanning is not supported by the CLI; Binding entries via DHCP 
Snooping is introduced in 

DHCP Snooping Configurations

. The following sections introduce 

how to bind entries manually and view the binding entries.

2.2.1  Binding Entries Manually

You can manually bind the IP address, MAC address, VLAN ID and the Port number 
together on the condition that you have got the related information of the hosts.

Follow these steps to manually bind entries:

Step 1

configure

Enter global configuration mode.

Step 2

ip source binding 

hostname

 

ip-addr mac-addr

 vlan 

vlan-id 

interface gigabitEthernet 

port

 { 

none | arp-detection

 } [ forced-source {

arp-scanning | dhcp-snooping

} ]

Manually bind the host name, IP address, MAC address, VLAN ID and port number of 

the host, and configure the protect type for the host. In addition, you can change the 

source of the entry as ARP Scanning or DHCP Snooping.

hostname

:

 

Specify a name for the host. It contains 20 characters at most.

ip-addr

:

 

Enter the IP address of the host.

mac-addr

:

 

Enter the MAC address of the host, in the format of xx:xx:xx:xx:xx:xx.

vlan-id

:

 

Enter the VLAN ID of the host.

port

:

 

Enter the number of the port on which the host is connected.

none | arp-detection 

:

 

Specify the protect type for the entry. None indicates this entry 

will not be applied to ARP Detection; arp-detection indicates this entry will be applied 

to ARP Detection.

arp-scanning | dhcp-snooping:

 

Change the source of the entry to ARP Scanning or 

DHCP Snooping.

Содержание T2500G-10MPS





































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды