TP-Link T2500G-10MPS, Руководство пользователя

Страница: 52 / 804

Configuration Guide 28
Managing System System Info Configurations
In the Serial Port Settings section, specify the Baud Rate and click Apply .
Baud Rate Configure the baud rate of the console connection. The default value is 38400 bps.
Date Bits Displays the data bits.
Parity Bits Displays the parity bits.
Stop Bits Displays the stop bits.
2.2 Using the CLI
2.2.1 Viewing the System Summary
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the system information of the switch:
show interface status [ fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port ]
View status of the interface.
port
: Enter the number of the Ethernet port.
show system-info
View the system information including system Description, Device Name, Device Location, System
Contact, Hardware Version, Firmware Version, System Time, Run Time and so on.
The following example shows how to view the interface status and the system information
of the switch.
Switch#show interface status
Port Status Speed Duplex FlowCtrl Jumbo Active-Medium
------- ----------- ----- ------ -------- --------- -------------
Gi1/0/1 LinkDown N/A N/A N/A Disable Copper
Gi1/0/2 LinkDown N/A N/A N/A Disable Copper
Gi1/0/3 LinkUp 1000M Full Disable Disable Copper
...
Switch#show system-info
System Description - JetStream 8-Port Gigabit L2 Managed PoE+ Switch with 2 SFP Slots
System Name - T2500G-10MPS
System Location - SHENZHEN
Contact Information - www.tp-link.com