manualshive.com logo in svg

TP-Link T2500G-10MPS, Руководство пользователя

Поделиться
Скачать
TP-Link T2500G-10MPS Скачать руководство пользователя страница 236

Configuration Guide  

  212

Configuring Protocol VLAN

Protocol VLAN Configuration

2 

Protocol VLAN Configuration

To complete protocol VLAN configuration, follow these steps:
1)  Configure 802.1Q VLAN, including creating a VLAN and setting the port type.
2)  Create protocol template.
3)  Configure Protocol VLAN.

Configuration Guidelines

 

You can use the IP, ARP, RARP, and other protocol templates provided by TP-Link 

switches, or create new protocol templates.

 

In a protocol VLAN, when a port receives an untagged data packet, the switch will first 

search for the protocol VLAN matching the protocol type value of the packet. (If MAC 

VLAN is also configured, the switch will first process MAC VLAN.) If there is a match, the 

switch will insert the corresponding VLAN tag to the data packet and forward it within 

the VLAN. Otherwise, the switch will forward the data packet to the default VLAN based 

on the PVID (Port VLAN ID) of the receiving port. When the port receives a tagged data 

packet, the switch will directly process the data packet according to the processing 

rule of the 802.1 Q VLAN.

2.1  Using the GUI

2.1.1  Configuring 802.1Q VLAN

Before configuring protocol VLAN, create an 802.1Q VLAN and set the port type according 

to network requirements. For details, refer to 

Configuring 802.1Q VLAN

.

Содержание T2500G-10MPS





































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды