Configuring Authentication
Configuration Example
Configuration Guide
177
To push hotel advertisement, you can simply customize the authentication page by set
the background picture and the welcome information.
7.3 Configuration Procedures
1) Enable Portal Authentication, choose the authentication type as Local Authentication,
and customize the authentication page.
2) Create the authentication accounts for the guests.
7.3.1 Configuring the Authentication Page
Choose the menu
Authentication > Authentication Settings > Web Authentication
to
load the following page.
1) Enable portal authentication, and keep the Idle Timeout and Portal Authentication Port
as default settings.
Figure 7-2 Enable Portal Authentication
2) Choose the Authentication Page as Custom page, pick a picture of the hotel as the
background picture on the authentication page, and specify the welcome information
and copyright.
Figure 7-3 Customize the authentication page
3) Choose the Authentication Type as Local Authentication, and configure the parameters
of expiration reminder. Then click
Save
.